Ceiling Fan Installation & Replacement
A well-positioned ceiling fan makes a real difference to comfort year-round. Used alongside air conditioning, a ceiling fan can reduce energy costs by improving efficiency.
Montgomery Electrical provides ceiling fan installation and replacement across Mosman and Sydney’s Lower North Shore, including indoor and outdoor ceiling fans and models with integrated lighting.
We can also install or upgrade LED downlights alongside your new ceiling fan to complete the room’s lighting setup.
What's involved?
We mount the bracket, make the electrical connections, balance the fan, and wire it to your chosen switch. If you're replacing an old fan, we'll remove and dispose of it. If you're installing in a new location, we'll check the ceiling structure and wiring requirements first.
Fans with integrated lighting
Ceiling fans with built-in light kits need careful wiring so the fan and light are controlled independently.
We'll confirm the right switch configuration before we start and make sure everything is wired correctly before we pack up.
Outdoor ceiling fan installation
Outdoor fans require IP-rated fittings suitable for weather exposure.
We'll confirm the right fan type for your alfresco or covered outdoor area and install it to the relevant Australian Standard.
AC vs DC ceiling fans
Most homes have older AC (alternating current) ceiling fans. DC fans are more energy efficient, typically using up to 70% less electricity, and often come with remote controls and more speed settings as standard. They cost more upfront but run quieter and cheaper over time.
If you're replacing an existing fan, it's worth considering whether a DC upgrade makes sense for the room. We're happy to advise on the options before you purchase.
Choosing the right fan for your space
Blade span matters.
Larger rooms need wider blades and a higher blade pitch to move enough air effectively. For outdoor areas, check that any fan you purchase is rated for outdoor or damp conditions. If you want remote control or smart home integration, confirm the wiring requirements before buying. We can advise on what will and won't work for your specific setup.
Can I install a ceiling fan myself?
In NSW, any ceiling fan installation involving electrical wiring must be carried out by a licensed electrician. DIY wiring is illegal and a genuine safety risk. We can usually have it done within the same visit as your quote.
FAQs
How much does ceiling fan installation cost?
1
In Sydney, a straightforward replacement where wiring is already in place typically runs $130 to $250.
A new installation requiring wiring, a new switch, or difficult ceiling access can run $220 to $550 or more. We provide a fixed quote before starting so you know exactly what you're paying.
Can I install a ceiling fan myself?
2
No. In NSW, ceiling fan installation involving electrical wiring must be done by a licensed electrician. DIY wiring is illegal and a genuine safety risk.
How long does ceiling fan installation take?
3
A standard replacement takes 1-2 hours. A new installation requiring wiring or a new switch point will take longer. We'll confirm the expected timeframe when we quote the job.
Can you install a ceiling fan where there is no existing light fitting?
4
Yes, though it requires running new wiring. We assess the ceiling structure and the most practical cable route before providing a quote.
AC fans are the most common type found in older homes. DC fans use up to 70% less electricity, run quieter, and typically come with more speed settings and remote control as standard.
They cost more upfront but are worth considering if you're replacing an existing fan.
What is the difference between AC and DC ceiling fans?
5
Every 5 years is a reasonable baseline for most homes. Older homes, recently purchased properties, and homes that have had renovation work are worth inspecting sooner.